![]() You can also try SSHing (I'm not up to date on the latest software for this, I used to use putty) into the router and running "brctl show" to see if its bridged correctly.īut if you're getting DHCP from pfSense it would imply everything should be working. The things to look out for are that in Interfaces the WiFi is showing in the LAN interface alongside the ethernet ports. I've tried to look into this but I can't make head nor tail out of the new OpenWRT network configuration. The AP has had its firewall and DHCP disabled as well. Also, notably, Wi-Fi devices are still given IP assignments in a range atypical of the pfSense router's range, where currently I have .001-254 allowed, Wi-Fi devices take on .100+ for IP leases. Pinging devices on the internal network works fine, but are unable to make connections outside of the LAN, e.g. However, Wi-Fi devices will connect to the AP and be assigned an IP but be unable to connect to WAN. Connecting devices to the AP's LAN switch ports works fine, DHCP is taken care of by the pfSense router and will connect to a previously assigned IP lease. This configuration initially seems to be functional. There's a couple of guides for this that I followed, but after trying a whole host of guides my current configuration is reflected loosely in this YouTube video. The AP is plugged into this card and therein the LAN Bridge, alongside other home devices. pfSense is configured on the LAN side with an Intel I350-T4 with all four ports in a network bridge serving as the home's LAN as for the current setup we have no need for a switch. ![]() ![]() Hey all, just got a pfSense router configured for my whole house, but as we already had some Belkin RT3200s with OpenWRT flashed I figured I'd reuse them as APs.
0 Comments
Leave a Reply. |